Setting up a secondary feed (to fr24)


#1

Hi,

regarding ads-b-flight-tracking-f21/multilateration-mlat-data-t39171.html i’m thinking about the integration of my feed to fr24 (or plane finder, or radarbox24).

My configuration (PiAware 3.5 w/ dump1090-fa).

fr24.conf:


receiver="avr-tcp"
fr24key=„***************"
host="127.0.0.1:30002"
bs="no"
raw="no"
logmode="2"
windowmode="0"
mpx="no"
mlat="yes"
mlat-without-gps="yes"

piaware.conf


allow-auto-updates yes   # updated by fa_piaware_config
allow-manual-updates yes   # updated by fa_piaware_config
receiver-host 192.168.0.14   # updated by fa_piaware_config (local ip of my raspberry)
rtlsdr-gain 50   # updated by fa_piaware_config

If i understand this setup should not feed the mlat-planes from FlightAware to fr24 and only FlightAware-MLAT Planes are shown on dump1090-fa. Right?

Thanks :slight_smile:


#2

Sure, port 30002 has only the off-the-air data, no mlat results.