I just started feeding data from my Raspberry Pi setup to FlightAware.
How can I see a map like on the right of this page http://flightaware.com/adsb/piaware/build
Thanks
It looks like everything should be working. So if you goto the IP address of the RPi you should be able to load up the map. 192.168.X.XXX on the right side of your stat page should be a IP address of your RPi. Click on it to bring up the map.
Point a web browser on one of your home computers at the following http://{Raspbery Pi IP Address}:8080
For example, if my Pi’s IP address was 192.168.2.36, I’d point the web browser at 192.168.2.36:8080
It looks like everything should be working
OK I found it! A little elusive.
Thanks … Don