Graphs for dump1090 -- my version with install script

[SoNic67]

For Beginners: How to Change / Set Gain

How to Change / Set the Gain The method of changing gain depends on the installed software, as detailed below. (1) Piaware SD Card image with integral dump1090-fa Do NOT change gain in file /etc/default/dump1090-fa. It will be overwritten at piaware restart and Pi reboot Set the gain by command: sudo piaware-config rtlsdr-gain xx.x OR Set the gain by editing file piaware-config.txt: Open file for editing by following command sudo nano /boot/piaware-config.txt In above file scro…