Hello there
have someone tested the adalm pluto sdr device capabilities as adsb receiver?
Thanks
Emil
Gentile bump… maybe this topic have been overseen.
Hello
that’s the generic description of the device and I have already since some time"digested" the information presented. Still thank you for the info.
I tried to flash the custom firmware but without success, I get a checksum error file after trying to update.
I guess I have to go over the dfu way even to update the firmware but I’m not that courageous to debug a bricked device.
Custom firmware:
https://www.rtl-sdr.com/plutoweb-custom-firmware-for-the-plutosdr-that-enables-you-to-run-openwebrx-dump1090-etc-directly-on-the-device/
Thanks again
Emil
I’ve managed to load the custom firmware on Pluto.
Its now running a dump1090 that is using google maps as background - what I suppose is outdated - but even so that it looks good for now.
The dump1090 server is accessed using http://pluto.local:8080/ and the config web page runs on http://192.168.2.1/
The question is how can I configure flightaware that it can use this host as data source?
Thanks again
Emil
Anything new at this topic? There is a fork of dump1090-fa with pluto support: