978 UAT - Is It Worth Adding?

[abcd567]

@abcd567

3.3.4.2 - configure dump1090 and dump978

$ sudo piaware-config uat-receiver-type sdr 
$ sudo sed -i 's/--device-index 0/--device-index 00001090/' /etc/default/dump1090-fa 
$ sudo sed -i 's/driver=rtlsdr/driver=rtlsdr,serial=00000978/' /etc/default/dump978-fa 

# Reboot Pi to implement configuration settings 
sudo reboot

Above is out-dated (valid before ver 6.1). From ver 6.1 onwards, use this:

(3.3.4.2) - Configure dump1090-fa & dump978-fa to use dongles of assigned serial numbers

sudo piaware-config uat-receiver-type sdr

sudo sed -i 's/^RECEIVER_SERIAL=.*/RECEIVER_SERIAL=00001090/' /etc/default/dump1090-fa  

sudo sed -i 's/driver=rtlsdr[^ ]* /driver=rtlsdr,serial=00000978 /' /etc/default/dump978-fa  

# Reboot Pi to implement configuration settings 

sudo reboot