Setting up antenna mast and using with piware

[rugomol]

Post your PiAware setup

Not much to brag about, but it works. Took this shot to show a buddy and figured I’d post it here. And not that I’m obsessive or anything, but I did add the missing ferrite bead on the black USB cable. http://i608.photobucket.com/albums/tt164/MarkTee/ADS-B%20Receiver_zpslo9pzpnk.jpg Mark

Disappointing results with my setup. What's wrong?

Folks, After many days failing miserably I give up, need help. Here is my setup Raspberry Pi 3 B FlightAware Pro Stick 8 elements Coax Antenna (7 1/2 actually) RGC213 antenna (11,3mm segments) RG58 feed cable (1m long) 50 Ohms BNC connectors 19V PoE injector + Splitter + 5V DC-DC Stepdown Everything installed on the roof of my 4 floor building The results are simply ridiculous, looks like there is no antenna at all. A 7mm wire give better results than the antenna itself (< 10nm) What I …

ADS-B DIY PiAware enclosure I build yesterday

I built this yesterday and it has been active for 36 hours now. Here is a little step by step [20180110_163525]