Live Map Stopped Working, Everything Else Working Fine[Fixd]

FlightAware ADS-B Flight Tracking
1

I just installed my PiAware a few days ago. And recently it stopped serving up the live map on my local network. Everything else is working just fine. My FlightAware stats page sees my PiAware and everything looks as it should. It’s not the IP address - I’ve tripled checked that. And I even tried reimaging the SD card with a fresh install. Still nothing. Anyone have a similar issue or know what’s up? Thanks

BTW, the error message in Chrome is: “The 192.168.1.101 page isn’t working; 192.168.1.101 didn’t send any data.”

Edit: Fixed. Just had to restart router.

2

Try 192.168.1.101/dump1090-fa/

3

Same thing

4

How about 192.168.1.101:8080

5

Is lighthttpd running?


 sudo /etc/init.d/lighttpd status
6

I had the exact same problem last week with a fresh install of PiAware from about two weeks ago. I found that replacing :8080 with /dump1090-fa/ fixed the problem (thanks to this forum!)

However, just a couple of nights ago, my system apparently upgraded something on it’s own and completely broke it. I had to wipe it and start with a fresh load of PiAware. After I did that, my :8080 started working again. For the last few days I have been refreshing it to see if it’s still going. So far, so good. I have since read my entire SD card into an image file so I can quickly restore it, if it happens again.

Happy ADS-B’ing!

7

Same thing.

It is. “Loaded: loaded; Active: active (running)”

I want to try to reformat the SD card and start over. But When I put the SD card into my computer nothing shows up! There is no drive to format.

8

Ok, I feel stupid now.

I just restarted the router and all is fine.

Must have just been some routing issue.

9

Glad you’re up and running!