Faup_adjust_upload_rate

[waltkev]

The command (below) was sent to one of my FlightAware receivers a couple of weeks ago and the performance seemed to double! Is this command an automated process of your system? I notice that when I update/upgrade/reboot my Raspberry Pis, the overall performance of my FA receivers dramatically decreases, i.e., by about half, until such a command is once again issued by FlightAware:

SITE 96355 - KCFD - K5BTX-1

SITE 111113 – KCFD – K5BTX-2

SITE 119158 – KCFD – K5BTX-3

SITE 119835 – KCFD – K5BTX-4

Command received:
[2022-10-13 12:44 CDT] adept server faup request received: faup_adjust_upload_rate
[2022-10-13 12:44 CDT] faup1090(981): handleFaupCommand(): Adjusting message rate to FlightAware by 3.00x

I have not noted any relationship to the opening or closing the PiAware SkyAware web app on the respective receivers.

Thank you!

[waltkev]

SITE 96355 - KCFD - K5BTX-1 - Again… after the faup request had been received, daily positions were around 350K, but after a Raspberry Pi update and reboot, daily positions were reduced to and remained at half of the previous levels.