Version 3.7.1 Add-on Package Install
1 - Serialized Dongles (Click here)
After serialuization, tested
rtl_test -t
Found 2 device(s):
0: Realtek, RTL2832UFA, SN: 00000978
1: Realtek, RTL2838UHIDIR, SN: 00001090
2 - Installed dump978-fa AND skyview978 ver 3.7.1
sudo apt update
sudo apt install -y git lighttpd
sudo apt install -y build-essential debhelper dh-systemd
sudo apt install -y libboost-system-dev libboost-program-options-dev libboost-regex-dev
sudo apt install -y libboost-filesystem-dev libsoapysdr-dev soapysdr-module-rtlsdr
git clone https://github.com/flightaware/dump978.git
cd dump978
git checkout v3.7.1
Note: checking out 'v3.7.1'.
HEAD is now at ff80def... Release v3.7.1
sudo dpkg-buildpackage -b
cd ../
sudo dpkg -i dump978-fa_3.7.1_armhf.deb
sudo dpkg -i skyview978_3.7.1_armhf.deb
.
Added Serial Number to file /etc/default/dump978-fa
sudo nano /etc/default/dump978-fa
.
added
,serial=00000978
after
driver=rtlsdr
.
ENABLED=yes
RECEIVER_OPTIONS="--sdr driver=rtlsdr,serial=00000978 --format CS8"
DECODER_OPTIONS=""
NET_OPTIONS="--raw-port 30978 --json-port 30979"
.
REBOOTED PI
pi@raspberrypi:~ $ sudo reboot
.
Checked
pi@raspberrypi:~ $ sudo systemctl status dump978-fa
● dump978-fa.service - dump978 ADS-B UAT receiver
Loaded: loaded (/lib/systemd/system/dump978-fa.service; enabled; vendor preset: enabled)
Active: active (running) since Sat 2019-05-04 02:31:04 EDT; 5s ago
● dump978-fa.service - dump978 ADS-B UAT receiver
Loaded: loaded (/lib/systemd/system/dump978-fa.service; enabled; vendor preset: enabled)
Active: active (running) since Sat 2019-05-04 02:31:04 EDT; 21s ago
Docs: https://flightaware.com/adsb/piaware/
Main PID: 899 (dump978-fa)
CGroup: /system.slice/dump978-fa.service
└─899 /usr/bin/dump978-fa --sdr driver=rtlsdr,serial=00000978 --format CS8 --raw-port 30978 --json-port 30979
May 04 02:31:05 raspberrypi dump978-fa[899]: Reattached kernel driver
May 04 02:31:05 raspberrypi dump978-fa[899]: Detached kernel driver
May 04 02:31:05 raspberrypi dump978-fa[899]: Found Rafael Micro R820T tuner
May 04 02:31:06 raspberrypi dump978-fa[899]: Reattached kernel driver
May 04 02:31:06 raspberrypi dump978-fa[899]: Detached kernel driver
May 04 02:31:06 raspberrypi dump978-fa[899]: Found Rafael Micro R820T tuner
May 04 02:31:07 raspberrypi dump978-fa[899]: Exact sample rate is: 2083333.135571 Hz
May 04 02:31:07 raspberrypi dump978-fa[899]: [R82XX] PLL not locked!
May 04 02:31:07 raspberrypi dump978-fa[899]: SoapySDR: using maximum manual gain 49.6 dB
May 04 02:31:07 raspberrypi dump978-fa[899]: SoapySDR: using stream setting buffsize=262144
.
Checked Map in Browser at following address
IP-of-PI/skyview978/
3 - INSTALLED DUMP1090-FA ver 3.7.1
sudo apt install -y debhelper dh-systemd librtlsdr-dev libusb-1.0-0-dev
sudo apt install -y git pkg-config libncurses5-dev lighttpd libbladerf-dev
git clone https://github.com/flightaware/dump1090.git dump1090-fa
cd dump1090-fa
git checkout v3.7.1
#Note: checking out 'v3.7.1'.
#.....
#HEAD is now at 4061477... Release v3.7.1
sudo dpkg-buildpackage -b
cd ../
sudo dpkg -i dump1090-fa_3.7.1_armhf.deb
.
Serial Number
sudo nano /etc/default/dump1090-fa
changed
--device-index 0
to
--device-index 00001090
.
ENABLED=yes
RECEIVER_OPTIONS="--device-index 00001090 --gain 42 --ppm 0 --net-bo-port 30005"
DECODER_OPTIONS="--max-range 360"
NET_OPTIONS="--net --net-heartbeat 60 --net-ro-size 1000 --net-ro-interval 1 --net-ri-port 0 --net-ro-port 30002 --net-sbs-port 30003 --ne$
JSON_OPTIONS="--json-location-accuracy 1"
.
Restarted
pi@raspberrypi:~ $ sudo systemctl restart dump978-fa
Checked
pi@raspberrypi:~ $ sudo systemctl status dump1090-fa
● dump1090-fa.service - dump1090 ADS-B receiver (FlightAware customization)
Loaded: loaded (/lib/systemd/system/dump1090-fa.service; enabled; vendor preset: enabled)
Active: active (running) since Sat 2019-05-04 04:14:05 EDT; 31min ago
Docs: https://flightaware.com/adsb/piaware/
Main PID: 425 (dump1090-fa)
CGroup: /system.slice/dump1090-fa.service
└─425 /usr/bin/dump1090-fa --device-index 00001090 --gain 42 --ppm 0 --net-bo-port 30005 --max-range 360 --net --net-heartbeat
May 04 04:14:05 raspberrypi systemd[1]: Started dump1090 ADS-B receiver (FlightAware customization).
May 04 04:14:05 raspberrypi dump1090-fa[425]: Sat May 4 04:14:05 2019 EDT dump1090-fa 3.7.1 starting up.
May 04 04:14:05 raspberrypi dump1090-fa[425]: rtlsdr: using device #1: Generic RTL2832U OEM (Realtek, RTL2838UHIDIR, SN 00001090)
May 04 04:14:06 raspberrypi dump1090-fa[425]: Detached kernel driver
May 04 04:14:06 raspberrypi dump1090-fa[425]: Found Rafael Micro R820T tuner
May 04 04:14:06 raspberrypi dump1090-fa[425]: rtlsdr: tuner gain set to 42.1 dB
.
4 - INSTALLED PIAWARE ver 3.7.1
sudo apt install -y git devscripts build-essential debhelper
sudo apt install -y tcl8.6-dev autoconf python3-dev python3-venv
sudo apt install -y virtualenv dh-systemd zlib1g-dev tclx8.4
sudo apt install -y tcllib tcl-tls itcl3 net-tools
sudo apt install -y libboost-system-dev libboost-program-options-dev
sudo apt install -y libboost-regex-dev libboost-filesystem-dev
git clone https://github.com/flightaware/piaware_builder.git
cd piaware_builder
git checkout v3.7.1
#Note: checking out 'v3.7.1'.
#........
#HEAD is now at 908fdef... Release v3.7.1
CODENAME=(`lsb_release -sc`)
echo ${CODENAME}
# above command outputs distro's codename
#("stretch" in this case)
./sensible-build.sh ${CODENAME}
cd package-${CODENAME}
sudo dpkg-buildpackage -b
cd ../
sudo dpkg -i piaware_3.7.1_armhf.deb
Configured Piaware
(used actual feeder-id in place of xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx )
sudo piaware-config feeder-id xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
sudo piaware-config allow-auto-updates yes
sudo piaware-config allow-manual-updates yes
sudo systemctl restart piaware
.
Enabled UAT in piaware-config by setting uat-receiver-type sdr
sudo piaware-config uat-receiver-type sdr
sudo systemctl restart piaware
CHECKED
pi@raspberrypi:~ $ sudo systemctl status piaware
● piaware.service - FlightAware ADS-B uploader
Loaded: loaded (/lib/systemd/system/piaware.service; enabled; vendor preset: enabled)
Active: active (running) since Sat 2019-05-04 04:22:18 EDT; 25min ago
Docs: https://flightaware.com/adsb/piaware/
Main PID: 1008 (piaware)
CGroup: /system.slice/piaware.service
├─1008 /usr/bin/piaware -p /run/piaware/piaware.pid -plainlog -statusfile /run/piaware/status.json
├─1036 /usr/lib/piaware/helpers/fa-mlat-client --input-connect localhost:30005 --input-type dump1090 --results beast,connect,l
├─1045 /usr/lib/piaware/helpers/faup1090 --net-bo-ipaddr localhost --net-bo-port 30005 --stdout --lat 43.xxx --lon -79.xxx
└─1054 /usr/lib/piaware/helpers/faup978 --connect localhost:30978
May 04 04:32:54 raspberrypi piaware[1008]: 1 msgs recv'd from dump978-fa (0 in last 5m); 1 msgs sent to FlightAware
May 04 04:37:23 raspberrypi piaware[1008]: mlat-client(1036): Receiver status: connected
May 04 04:37:23 raspberrypi piaware[1008]: mlat-client(1036): Server status: synchronized with 64 nearby receivers
May 04 04:37:23 raspberrypi piaware[1008]: mlat-client(1036): Receiver: 40.7 msg/s received 18.3 msg/s processed (45%)
May 04 04:37:23 raspberrypi piaware[1008]: mlat-client(1036): Server: 0.0 kB/s from server 0.0kB/s TCP to server 0.2kB/s UDP
May 04 04:37:23 raspberrypi piaware[1008]: mlat-client(1036): Aircraft: 6 of 7 Mode S, 5 of 5 ADS-B used
May 04 04:37:54 raspberrypi piaware[1008]: 500 msgs recv'd from dump1090-fa (174 in last 5m); 500 msgs sent to FlightAware
May 04 04:37:54 raspberrypi piaware[1008]: 1 msgs recv'd from dump978-fa (0 in last 5m); 1 msgs sent to FlightAware
May 04 04:42:54 raspberrypi piaware[1008]: 635 msgs recv'd from dump1090-fa (135 in last 5m); 635 msgs sent to FlightAware
May 04 04:42:54 raspberrypi piaware[1008]: 1 msgs recv'd from dump978-fa (0 in last 5m); 1 msgs sent to FlightAware
.
.
