Where is unique ID stored?

[LawrenceHill]

@fajg22

You don’t have a feeder ID yet.

Are you trying to install on a pi-star?
If so these posts might help:

V3.81 new user failed to claim feed

So I’ve solved the problem. It was a firewall problem on the PI. I was not aware that iptables was enabled and its outgoing rules did not allow connection on port 1200. I diagnosed the issue by using tcpdump to catch all packets to port 1200 and discovered it did not even see the first TCP handshake packet. That made me suspect the packet was dropped at the first place. After I cleaned the iptables rules, everything back to normal, I was able to claim my new feed. Many thanks @obj

Pi-Star and PiAware

Hi community. Long time reader, first time poster. I’m trying to set up a pi-star system to also run piaware. I found three topics mentioning this subject briefly on the forums here. There are no mentions in the pi-star forums. Information I’ve gleaned so far include the need to adjust the settings of /etc/lighttpd/lighttpd.conf to change from port 80 (used by pi-star) to port 8888. https://discussions.flightaware.com/t/v3-81-new-user-failed-to-claim-feed/ However, I’m a little confused about…