What's wrong with this picture? (Tracks messed up)

[digiblur]

@obj

@digiblur

Nice to see some Mlat in the US. Feeding my VRS for over 12 hours now and not one plane has shown. Thinking of turning mine off until it is needed. I guess all the feeders in my area haven’t set their antenna. It does say enabled MLAT on their page but I guess it throws them out. Wish you could message these people some how.

How will you tell when it’s needed?

I wonder if your use of modes2mixer is somehow breaking things. There’s no obvious problems I can see with your site other than you just have no clock synchronization with any other receiver. But that may just be due to a lack of overlap. Can you try a vanilla setup?

I would tell by receivers popping up in the area. I usually keep an eye on my neighbors on the map from time to time.

I will snag another SD card this weekend and do a fresh build with a plain jane setup this weekend to see if it is modesmixer

[LCOVA76]

How do you get to display the MLAT traffic in youre dump1090??

[LCOVA76]

@Adraenyse

Upgrade to the latest Piaware release.

It’s Only using the PiAware ??
I have a FlightFeeder and it doesnt appear…

Can I Install the PiAware, and use the 30003 port from the FlightFeeder to get the antenna info??
Or does it has to be from the Antenna connected to the USB dongle on the RPi??

[obj]

@LCOVA76

I have a FlightFeeder and it doesnt appear…

Flightfeeder mlat support isn’t completed yet (though it’s on the list)

[sjacket99]

@jepolch

Just since today my tracks in dump1090-muta and VRS are all messed up. I’m showing VRS here because I can show all the tracks at once, but they look the same in dump using lighttpd. Do I have something misconfigured? This is VRS v2.1 - not the new preview version.

http://i61.tinypic.com/auf61h.jpg

Joe,

How can you make the lines for the planes a different color? Like you have pink etc. I looked around on VRS and didn’t see it, unless I am missing over looking something.

Thanks.

[mighty3507]

Joe,

How can you make the lines for the planes a different color? Like you have pink etc. I looked around on VRS and didn’t see it, unless I am missing over looking something.

Thanks.

The ‘Position and altitude’ setting below should do the trick. The colors of the trail varies based on altitude.

–Steve

[sjacket99]

@mighty3507

Joe,

How can you make the lines for the planes a different color? Like you have pink etc. I looked around on VRS and didn’t see it, unless I am missing over looking something.

Thanks.

The ‘Position and altitude’ setting below should do the trick. The colors of the trail varies based on altitude.

–Steve

http://i.imgur.com/7eaQhqE.png

Wow… That was easy. Somethings are just right in front of you. I was looking at that before and never thought about clicking on that button. LOL. Live and learn. Thanks.