Sd card issue

[abcd567]

@SoNic67 is right.
Slip-out micoSD card from RPi, slip-in into Desktop/Laptop using a card reader, and do following:

@abcd567

After image is written, and microSD card is still in card reader of Desktop/Laptop, (a) Enable ssh (b) Configure WiFi

(a) To enable SSH:

Windows:
In File Explorer, double click the drive letter of microSD card. This will open the folder /boot and show lots of files and some folders. Right click in /boot folder, and create a new blank file named ssh or ssh.txt

Mac: Open terminal and give following command
$ touch /Volumes/piaware/ssh

(b) To enable Wifi on first boot (if required):

Windows:
In File Explorer, double click the drive letter of microSD card. This will open the folder /boot and show lots of files and some folders. Open file “piaware-config.txt” using a text editor like Notepad.

Mac: Open the Finder program. Select the Micro SD card device labeled piaware. Open the file “piaware-config.txt”. The file will open in TextEdit.

In the opened file “piaware-config.txt”, scroll down till you see this text:

wireless-ssid MyWifiNetwork
wireless-password s3cr3t99

Replace MyWifiNetwork by your router’s wifi ssid, and s3cr3t99 by your router’s wifi password