Here are the last few lines of the FlightAware log.
[2016-10-19 11:35 MDT] mlat-client(1943): Aircraft: 7 of 7 Mode S, 1 of 1 ADS-B used
[2016-10-19 11:39 MDT] 24771 msgs recv’d from dump1090-fa (58 in last 5m); 24771 msgs sent to FlightAware
[2016-10-19 11:44 MDT] 24838 msgs recv’d from dump1090-fa (67 in last 5m); 24838 msgs sent to FlightAware
[2016-10-19 11:49 MDT] 24879 msgs recv’d from dump1090-fa (41 in last 5m); 24879 msgs sent to FlightAware
[2016-10-19 11:50 MDT] mlat-client(1943): Receiver status: connected
[2016-10-19 11:50 MDT] mlat-client(1943): Server status: not synchronized with any nearby receivers
[2016-10-19 11:50 MDT] mlat-client(1943): Receiver: 11.3 msg/s received 8.6 msg/s processed (76%)
[2016-10-19 11:50 MDT] mlat-client(1943): Server: 0.1 kB/s from server 0.0kB/s TCP to server 0.1kB/s UDP to server
[2016-10-19 11:50 MDT] mlat-client(1943): Results: 47.1 positions/minute
[2016-10-19 11:50 MDT] mlat-client(1943): Aircraft: 6 of 7 Mode S, 0 of 0 ADS-B used
On my side, piaware status shows this:
pi@raspberrypi:~ $ piaware-status
PiAware master process (piaware) is running with pid 581.
PiAware ADS-B client (faup1090) is running with pid 1832.
PiAware mlat client (fa-mlat-client) is running with pid 1926.
Local ADS-B receiver (dump1090-fa) is running with pid 569.
dump1090-fa (pid 569) is listening for connections on port 30005.
faup1090 is connected to the ADS-B receiver.
piaware is connected to FlightAware.
dump1090 is producing data on localhost:30005.
The time is now 13:55 MDT. As you can see, everything is connected. My site information reads as:
Data Feed: Live - 59 minutes ago
Feeder Check-in: Live - 4 minutes ago
Joined: 13-Oct-2016
Longest Streak: 7 days (13-Oct-2016 - Today)
Feeder Type: PiAware 3.1.0
Multilateration (MLAT): Supported / Enabled (synchronized with 7 nearby receivers)
It appears that I have not reported any data in over an hour. Can anyone be of assistance in helping me figure out what is happening?
Thanks