Shielding FA Dongle / Pi from Antenna - Directly Connected - No cable

[rugomol]

The effect is negligible. The same technical solution - ADS-B FlightAware Enclosure Build - Album on Imgur

Post your PiAware setup

Here is my (almost) finished setup. The enclosure is installed 3meters below the antenna on top of a small building. [image]

Disappointing results with my setup. What's wrong?

Folks, After many days failing miserably I give up, need help. Here is my setup Raspberry Pi 3 B FlightAware Pro Stick 8 elements Coax Antenna (7 1/2 actually) RGC213 antenna (11,3mm segments) RG58 feed cable (1m long) 50 Ohms BNC connectors 19V PoE injector + Splitter + 5V DC-DC Stepdown Everything installed on the roof of my 4 floor building The results are simply ridiculous, looks like there is no antenna at all. A 7mm wire give better results than the antenna itself (< 10nm) What I …