Ignore please thought i deleted this one

FlightAware ADS-B Flight Tracking
1

[2015-07-18 21:23 EDT] piaware (process 2246) is exiting…
[2015-07-18 21:23 EDT] autoUpdate in adept config is enabled, allowing update
[2015-07-18 21:23 EDT] manualUpdate in adept config is enabled, allowing update
[2015-07-18 21:23 EDT] multilateration support enabled (use piaware-config to disable)
[2015-07-18 21:23 EDT] no ADS-B data program seen listening on port 30005 for 1 seconds, next check in 60s
[2015-07-18 21:23 EDT] multilateration support enabled (use piaware-config to disable)
[2015-07-18 21:23 EDT] multilateration data requested, enabling mlat client
[2015-07-18 21:23 EDT] no ADS-B data program is serving on port 30005, not starting multilateration client yet
[2015-07-18 21:23 EDT] 0 msgs recv’d from the ADS-B data program; 0 msgs sent to FlightAware
[2015-07-18 21:24 EDT] no ADS-B data program seen listening on port 30005 for 61 seconds, next check in 60s
[2015-07-18 21:24 EDT] no ADS-B data program is serving on port 30005, not starting multilateration client yet

Any ideas on what I missed
thanks

2

running piaware status on putty yields this

pi@raspberrypi ~ $ sudo piaware-status
dump1090 is not running.
faup1090 is not running.
piaware is running.
no program appears to be listening for connections on port 30005.
faup1090 is NOT connected to port 30005.
piaware is connected to FlightAware.
got ‘couldn’t open socket: connection refused’
maybe dump1090 is NOT producing data on port 30005.