Announcing the new 978 MHz antenna!

[varnav]

Version that supports two receivers is already out, it’s 3.7.1
I am running two receivers now. You will probably need powered USB hub or you may lose performance with two dongles.

Here is how to do this:

How-to Serialize Dongles for ES1090 + UAT978

1 - How to Change Serial Number of Dongles Basically it is done by following command: rtl_eeprom -s [desired_serial_number] 1.1 - Prepare sudo apt update sudo apt install rtl-sdr sudo systemctl stop piaware dump1090-fa dump978-fa 1.2 - Serialize dump1090-fa dongle Serialization is done one dongle at a time. Lets start with serializing dump1090-fa dongle. Plugin the dump1090-fa dongle, and unplug all other dongles. Give following command: rtl_eeprom -s 00001090 The last line of outpu…