Airspy ADS-B decoder

FlightAware ADS-B Flight Tracking
39

ModeSDeco2 has lot of settings for AirSpy

abcd@abcd-PC:/usr/share/md2$ ./modesdeco2 --help
ModeSDeco2 v.20180729
Program options:
... ... ...
... ... ...
  --airspy                  Select AirSpy device
  --airspy-sn arg           Select AirSpy device by serial number
  --airspy-lna arg          Set LNA gain in AirSpy Receiver chip (default: 15)
  --airspy-mixer arg        Set Mixer gain in AirSpy Receiver chip (default: 
                            15)
  --airspy-sr arg           Set AirSpy sample rate (default: max available)
                             Example: 4, 6, 10
  --airspy-rfbias           Enable AirSpy RF Bias (default: off)
  --airspy-if arg           Set IF gain in AirSpy Receiver chip (default: 13)
  --airspy-workers arg      Set Airspy decoding worker threads (default: 1)
  --airspy-decimation arg   Set Airspy decoding decimation factor (default: 1)
  --airspy-fecbits arg      Forward Error Correction (FEC) bits (0..2) 
                            (default: 1)
  --airspy-linearity arg    Select Airspy linearity gains (0..21)
  --airspy-crc-valid        Select only CRC valid frames (default: off)
  --disable-correction      Disable correction of corrupted signals (Default: on)
... ... ...
  --avrmlatas arg           Enable AVR MLAT AirSpy output listen port (default:
1 Like