# Site not checked in
**URL:** https://discussions.flightaware.com/t/site-not-checked-in/100229
**Category:** ADS-B Flight Tracking
**Created:** [March 23, 2026, 4:18pm UTC](https://discussions.flightaware.com/t/site-not-checked-in/100229 "2026-03-23T16:18:15Z")
**Posts on this page:** 12
**Page:** 1
### Author:  [@CanonSnapper](https://discussions.flightaware.com/u/CanonSnapper)
#### Post date: [March 23, 2026, 4:18pm UTC](https://discussions.flightaware.com/t/site-not-checked-in/100229/1 "2026-03-23T16:18:15Z")
On my feed page I get the following message and there is also no MLAT data.
\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_
**Site 227181**
1. **This feeder last checked in several hours ago** \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_
---
### Author:  [@CraigWoodThomas](https://discussions.flightaware.com/u/CraigWoodThomas)
#### Post date: [March 23, 2026, 4:51pm UTC](https://discussions.flightaware.com/t/site-not-checked-in/100229/2 "2026-03-23T16:51:21Z")
Sounds like your internet connection is not being seen by the feeder.
---
### Author:  [@CanonSnapper](https://discussions.flightaware.com/u/CanonSnapper)
#### Post date: [March 23, 2026, 5:09pm UTC](https://discussions.flightaware.com/t/site-not-checked-in/100229/3 "2026-03-23T17:09:02Z")
I can access the data on the Pi by ssh into it so it is connected to the internet and it produces non MLAT records.
---
### Author:  [@tomvdhorst](https://discussions.flightaware.com/u/tomvdhorst)
#### Post date: [March 23, 2026, 6:24pm UTC](https://discussions.flightaware.com/t/site-not-checked-in/100229/4 "2026-03-23T18:24:48Z")
Did you try to reboot the router and the feeder?
First reboot the feeder (I assume you have a Raspberry Pi) and if the condition doesn’t change reboot your router and check again.
By rebooting the router you are rebuilding the communication path towards the Flightaware servers, rebooting your Pi will use the existing route.
If that doesn’t solve it you might wat to show some logging so we can figure out what is going on.
---
### Author:  [@CanonSnapper](https://discussions.flightaware.com/u/CanonSnapper)
#### Post date: [March 23, 2026, 6:28pm UTC](https://discussions.flightaware.com/t/site-not-checked-in/100229/5 "2026-03-23T18:28:52Z")
seems I have now got 2 sites, original 227181 and a second one 270145. I just want the data going to the original site.
---
### Author:  [@tomvdhorst](https://discussions.flightaware.com/u/tomvdhorst)
#### Post date: [March 23, 2026, 6:37pm UTC](https://discussions.flightaware.com/t/site-not-checked-in/100229/6 "2026-03-23T18:37:30Z")
that can be fixed, look at the stats page of your original feeder and copy the unique identifier.
login to you pi
Execute the following command:
sudo piaware-config feeder-id xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
Replace the xxxxx part with your unique identifier and hit Enter
Copy the next command to activate the new configuration.
sudo systemctl restart piaware (and hit enter)
That will get the reporting back to your original site again.
The 2nd one can be removed after 24 hrs of inactivity or will dissapear after 30 days.
---
### Author:  [@CanonSnapper](https://discussions.flightaware.com/u/CanonSnapper)
#### Post date: [March 23, 2026, 6:48pm UTC](https://discussions.flightaware.com/t/site-not-checked-in/100229/7 "2026-03-23T18:48:11Z")
I’ve checked original site but no unique identifier shows only:
Nearest Airport: **RNAS Yeovilton (Yeovil, England) ([EGDY](https://www.flightaware.com/live/airport/EGDY))**
Location: **(51.02, -2.58)**
Location Set: **June 21, 2024 11:18 AM**
Location Source: **User entered**
Feeder Check-In: **9 hours ago**
Feeder Type: **PiAware (Debian Package Add-on) 9.0.1**
Feeder Mode: **Mode-S (1090 MHz)**
Multilateration (MLAT): **Supported / Enabled (synchronized with 511 nearby received**
---
### Author:  [@LawrenceHill](https://discussions.flightaware.com/u/LawrenceHill)
#### Post date: [March 23, 2026, 7:09pm UTC](https://discussions.flightaware.com/t/site-not-checked-in/100229/8 "2026-03-23T19:09:40Z")
> [@CanonSnapper](#):
>
> I’ve checked original site but no unique identifier shows only:
If it isn’t showing the unique id then you are most likely not logged into your account. You need to be logged in to see it.
---
### Author:  [@CanonSnapper](https://discussions.flightaware.com/u/CanonSnapper)
#### Post date: [March 23, 2026, 8:22pm UTC](https://discussions.flightaware.com/t/site-not-checked-in/100229/9 "2026-03-23T20:22:22Z")
This is **PiAware (Debian Package Add-on) 9.0.1,** I don’t know if that makes a difference.
---
### Author:  [@LawrenceHill](https://discussions.flightaware.com/u/LawrenceHill)
#### Post date: [March 23, 2026, 8:42pm UTC](https://discussions.flightaware.com/t/site-not-checked-in/100229/10 "2026-03-23T20:42:44Z")
> [@CanonSnapper](#):
>
> I don’t know if that makes a difference.
No, that doesn’t make any difference.
The page you need to log into is this one:
> **[CanonSnapper ADS-B Feeder Statistics - FlightAware](https://uk.flightaware.com/adsb/stats/user/CanonSnapper)**
>
> Statistics for sites feeding ADS-B flight tracking data to FlightAware. Sites, users, countries, regions, and teams are ranked by the number of aircraft reported.
At the very top of the page you will find the login link.
---
### Author:  [@CanonSnapper](https://discussions.flightaware.com/u/CanonSnapper)
#### Post date: [March 23, 2026, 8:58pm UTC](https://discussions.flightaware.com/t/site-not-checked-in/100229/11 "2026-03-23T20:58:42Z")
No where to login, just shows my previous stats….just gone through my old records and found the unique identifier need so hope that works.
Thanks for your efforts to help.
---
### Author:  [@LawrenceHill](https://discussions.flightaware.com/u/LawrenceHill)
#### Post date: [March 23, 2026, 9:29pm UTC](https://discussions.flightaware.com/t/site-not-checked-in/100229/12 "2026-03-23T21:29:16Z")
> [@CanonSnapper](#):
>
> No where to login
I know that you have found the id now but the login is where I have circled on this image.
