# Sharing my data
**URL:** https://discussions.flightaware.com/t/sharing-my-data/52932
**Category:** ADS-B Flight Tracking
**Created:** [July 27, 2019, 11:34am UTC](https://discussions.flightaware.com/t/sharing-my-data/52932 "2019-07-27T11:34:46Z")
**Posts on this page:** 10
**Page:** 1
### Author:  [@thomascundy](https://discussions.flightaware.com/u/thomascundy)
#### Post date: [July 27, 2019, 11:34am UTC](https://discussions.flightaware.com/t/sharing-my-data/52932/1 "2019-07-27T11:34:46Z")
From the instructions i’m aware that the first install is a desktop application for the raspberrypi but as I am using stretch and feed to FR24 radarbox and radar360 I am wondering if I can share my data without doing the desktop install that may delete my current feeds. as I can currently do things by commands screen only if that makes sense, (I’m new)
---
### Author:  [@foxhunter](https://discussions.flightaware.com/u/foxhunter)
#### Post date: [July 27, 2019, 11:37am UTC](https://discussions.flightaware.com/t/sharing-my-data/52932/2 "2019-07-27T11:37:20Z")
You should be able with this which describes how to install the client on an existing device:
> **[PiAware - dump1090 ADS-B integration with FlightAware - FlightAware](https://flightaware.com/adsb/piaware/install)**
>
> Setup PiAware to directly feed live ADS-B data to FlightAware via a Raspberry Pi running dump1090. Step-by-step instructions along with a link to your statistics and how to register for a free FlightAware Enterprise account.
---
### Author:  [@wiedehopf](https://discussions.flightaware.com/u/wiedehopf)
#### Post date: [July 27, 2019, 12:07pm UTC](https://discussions.flightaware.com/t/sharing-my-data/52932/3 "2019-07-27T12:07:24Z")
> [@foxhunter](#):
>
> which describes how to install the client on an existing device:
Well if he wants to keep using his current dump1090, then he should not install dump1090-fa.
But the rest of the guide is valid.
@thomascundy
Just omit Step 3 (`sudo apt-get install dump1090-fa`) from the guide.
Depending on what dump1090 you are currently using, you might need to configure it to offer beast data on port 30005.
---
### Author:  [@foxhunter](https://discussions.flightaware.com/u/foxhunter)
#### Post date: [July 27, 2019, 12:08pm UTC](https://discussions.flightaware.com/t/sharing-my-data/52932/4 "2019-07-27T12:08:38Z")
Uh, you’re right, i missed that part.
---
### Author:  [@thomascundy](https://discussions.flightaware.com/u/thomascundy)
#### Post date: [July 27, 2019, 12:54pm UTC](https://discussions.flightaware.com/t/sharing-my-data/52932/5 "2019-07-27T12:54:17Z")
Right so I’ve done that on flightaware site it shows my Pi IP ends 80 but it’s 81 (80 was previous setup) how do it change this?
---
### Author:  [@wiedehopf](https://discussions.flightaware.com/u/wiedehopf)
#### Post date: [July 27, 2019, 12:59pm UTC](https://discussions.flightaware.com/t/sharing-my-data/52932/6 "2019-07-27T12:59:31Z")
> [@thomascundy](#):
>
> how do it change this?
This is most likely what you want:
[For Beginners - How to Get Back Existing Station Number in A Fresh Install](https://discussions.flightaware.com/t/for-beginners-how-to-get-back-existing-station-number-in-a-fresh-install/30981)
---
### Author:  [@foxhunter](https://discussions.flightaware.com/u/foxhunter)
#### Post date: [July 27, 2019, 1:28pm UTC](https://discussions.flightaware.com/t/sharing-my-data/52932/7 "2019-07-27T13:28:17Z")
I think he is more related to the port where the web interface goes to (80 and 81), or?
---
### Author:  [@wiedehopf](https://discussions.flightaware.com/u/wiedehopf)
#### Post date: [July 27, 2019, 1:42pm UTC](https://discussions.flightaware.com/t/sharing-my-data/52932/8 "2019-07-27T13:42:11Z")
> [@foxhunter](#):
>
> port where the web interface goes
Well you can’t change that.
The stats webpage assumes you are using a standard install.
---
### Author:  [@thomascundy](https://discussions.flightaware.com/u/thomascundy)
#### Post date: [July 27, 2019, 2:35pm UTC](https://discussions.flightaware.com/t/sharing-my-data/52932/9 "2019-07-27T14:35:29Z")
Thanks that’s sorted and back up and running. I had set it up on a Pi 4 but not everything worked and found out Pi 4 and buster wasn’t supported (when I contacted support) so got the 3 and set everything else up and only just round to flightaware
---
### Author:  [@wiedehopf](https://discussions.flightaware.com/u/wiedehopf)
#### Post date: [July 27, 2019, 3:18pm UTC](https://discussions.flightaware.com/t/sharing-my-data/52932/10 "2019-07-27T15:18:03Z")
The Pi4 works with some tweaks. See this post: [New Raspberry Pi available - Pi 4 - #363 by wiedehopf](https://discussions.flightaware.com/t/new-raspberry-pi-available-pi-4/51584/363)
I would recommend using dump1090-fa instead of your current dump1090, but it’s not required.
If you are currently using the builtin fr24feed dump1090, i you can use my script that changes over to dump1090-fa while still keeping the old map around:
[Bundle install for dump1090fa · wiedehopf/adsb-wiki Wiki · GitHub](https://github.com/wiedehopf/adsb-wiki/wiki/Bundle-install-for-dump1090fa)