Hi all,
I have been running PiAware on an old RPi Model B, and decided to upgrade the hardware.
I followed the instructions for a new install, and then added the ‘feeder-id’ of the existing feeder to the config file on the new device.
However, even after leaving it overnight, there is no network connectivity and I am therefore unable to claim the receiver. I am using a wired connection, everything in this regard is the same as the previous model.
Is there a compatibility issue with the new hardware?
All help and suggestions are much appreciated.
Piaware SD card image is NOT (yet) compatible to RPi 3 B+
Please do following:
-
Download and write to your microSD card, the latest version of Raspbian image:
Raspbian Stretch Lite
Release date: 2018-06-27
Download page: [url]Raspberry Pi OS – Raspberry Pi
Direct download link: [url]https://downloads.raspberrypi.org/raspbian_lite_latest[/url]
-
Go to this page and install PiAware feeder and dump1090-fa
[url]https://flightaware.com/adsb/piaware/install[/url]
Ah sorry I must have missed this! I’ll give it a go and report back.
Thanks 
EDIT: All working, thanks for the help.
