# Raspberry Pi 3 - Model B+ **URL:** \ **Category:** ADS-B Flight Tracking\ **Created:** [March 16, 2018, 10:31pm UTC](https://discussions.flightaware.com/t/raspberry-pi-3-model-b/32760 "2018-03-16T22:31:33Z")\ **Posts on this page:** 1\ **Showing post:** 6
**Author:** ![jonhawkes2030](https://sea1.discourse-cdn.com/flex019/user_avatar/discussions.flightaware.com/jonhawkes2030/32/113977_2.png) [@jonhawkes2030](https://discussions.flightaware.com/u/jonhawkes2030)\ **Post date:** [March 18, 2018, 3:33pm UTC](https://discussions.flightaware.com/t/raspberry-pi-3-model-b/32760/6 "2018-03-18T15:33:25Z")
See [www.adsbreceiver.net](http://www.adsbreceiver.net) > [@ADS-B Receiver Project Setup Scripts](https://discussions.flightaware.com/t/ads-b-receiver-project-setup-scripts/17807): > > The ADS-B Receiver Project is a set of bash scripts and files which can be used to setup an ADS-B receiver on a Debian derived operating system. The scripts are executed in order by the main install script depending on the installation options chosen by the user. The project originally started out as a set of scripts created for my personal use to get a feeder back up and running quickly when a catastrophic event such as a SD card going bad happened. From there the project has grown quite a bit … --- _[View the full topic](https://discussions.flightaware.com/t/raspberry-pi-3-model-b/32760)._