RadarBox, suddenly Mlat not working anymore

[vsqz44]

Hi,
I have 2 stations. A rpi and an Orange pi. Suddenly, both of them stop mlat.
Below , attached mlat status, same on Rpi and Orange Pi.

Thanks

[abcd567]

What is the mlat line under CGroup in output of following command?

sudo systemctl status rbfeeder

Please see below. The mlat-client is active is confirmed by output of above command. In status output, it is second line under CGroup starting with “1512 /usr/bin/python3”. If your output is similar , then mlat is working OK.

Note: output is long line. Please scroll right to see it in full.

     CGroup: /system.slice/rbfeeder.service
             ├─1479 /usr/bin/rbfeeder
             └─1512 /usr/bin/python3.9 /usr/bin/mlat-client --input-type dump1090 --input-connect 127.0.0.1:32457 --server mlat1.rb24.com:40900 --lat 43.5xxxxx --lon -79.6xxxxx --alt 155 --user EXTRPI000035 --results beast,connect,127.0.0.1:32004

 

EDIT:
Although mlat is active in all my Pi’s, it is currently not showing active on any of my sites

https://radarbox.com/stations/EXTRPI000008

https://radarbox.com/stations/EXTRPI000035

https://radarbox.com/stations/EXTRPI000036

This seems RB24 Server issue.

 

[vsqz44]

@abcd567

This seems RB24 Server issue.

Hi, @abcd567
Indeed, both my CGroup are quite the same as yours.

Thanks a lot !