# Piaware run not well **URL:** \ **Category:** ADS-B Flight Tracking\ **Created:** [December 1, 2018, 12:27pm UTC](https://discussions.flightaware.com/t/piaware-run-not-well/43175 "2018-12-01T12:27:53Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![aero62](https://sea1.discourse-cdn.com/flex019/user_avatar/discussions.flightaware.com/aero62/32/127644_2.png) [@aero62](https://discussions.flightaware.com/u/aero62)\ **Post date:** [December 1, 2018, 12:27pm UTC](https://discussions.flightaware.com/t/piaware-run-not-well/43175/1 "2018-12-01T12:27:54Z")
I have a RPi 2 with Piaware 3.6.3 installed, FlightAware Pro Stick SDR, a good DIY antenna and LAN connection. In my new site (92476), tree green light, but y have no positions report and this problems: [2018-12-01 09:23 -03] dump1090 start appears to have been successful [2018-12-01 09:23 -03] no ADS-B data program is serving on port 30005, not starting multilateration client yet [2018-12-01 09:23 -03] no ADS-B data program seen listening on port 30005 for 10 seconds, next check in 60s I restart my system a couple of times, but nothing… Any suggestions? thank you !!! ---
**Author:** ![wiedehopf](https://sea1.discourse-cdn.com/flex019/user_avatar/discussions.flightaware.com/wiedehopf/32/114045_2.png) [@wiedehopf](https://discussions.flightaware.com/u/wiedehopf)\ **Post date:** [December 1, 2018, 5:26pm UTC](https://discussions.flightaware.com/t/piaware-run-not-well/43175/2 "2018-12-01T17:26:31Z")
how did you install it? in case you are connected with ssh: ```auto sudo systemctl dump1090-fa restart sudo journalctl -u dump1090-fa -e --no-pager -n100 ``` And post the output. ---
**Author:** ![aero62](https://sea1.discourse-cdn.com/flex019/user_avatar/discussions.flightaware.com/aero62/32/127644_2.png) [@aero62](https://discussions.flightaware.com/u/aero62)\ **Post date:** [December 1, 2018, 9:02pm UTC](https://discussions.flightaware.com/t/piaware-run-not-well/43175/3 "2018-12-01T21:02:53Z")
Hi First command line: sudo systemctl dump1090-fa restart Unknow operation dump1090-fa Second line: sudo journalctl -u dump1090-fa -e --no-pager -n100 a loooooooooong list, say "rtlsdr no supported devices found… ☹ ---
**Author:** ![wiedehopf](https://sea1.discourse-cdn.com/flex019/user_avatar/discussions.flightaware.com/wiedehopf/32/114045_2.png) [@wiedehopf](https://discussions.flightaware.com/u/wiedehopf)\ **Post date:** [December 1, 2018, 10:52pm UTC](https://discussions.flightaware.com/t/piaware-run-not-well/43175/4 "2018-12-01T22:52:52Z")
> [@aero62](#): > > a loooooooooong list, say "rtlsdr no supported devices found… ☹ That basically means the dongle is not working. Is it connected directly to the pi? I’m gonna ask you again which sd-card image are you using? also run ```auto sudo rtl_test ``` Copy pasting the output would be helpful. If you are using Putty marking it should be enough. Then use CTRL-V to paste it here. (Oh the first command was wrong in needs to be “sudo systemctl restart dump1090-fa” but it doesn’t matter) ---
**Author:** ![aero62](https://sea1.discourse-cdn.com/flex019/user_avatar/discussions.flightaware.com/aero62/32/127644_2.png) [@aero62](https://discussions.flightaware.com/u/aero62)\ **Post date:** [December 1, 2018, 11:45pm UTC](https://discussions.flightaware.com/t/piaware-run-not-well/43175/5 "2018-12-01T23:45:06Z")
Is it connected directly to the pi? Yes I’m gonna ask you again which sd-card image are you using? Piaware 3.6.3 Copy pasting the output would be helpful. If you are using Putty marking it should be enough. Then use CTRL-V to paste it here. I will try. I must connect the Pi2 with HDMI to the TV. Thank you ---
**Author:** ![wiedehopf](https://sea1.discourse-cdn.com/flex019/user_avatar/discussions.flightaware.com/wiedehopf/32/114045_2.png) [@wiedehopf](https://discussions.flightaware.com/u/wiedehopf)\ **Post date:** [December 2, 2018, 12:31am UTC](https://discussions.flightaware.com/t/piaware-run-not-well/43175/6 "2018-12-02T00:31:34Z")
If you don’t use ssh/putty then copy paste can’t work of course 😉 Also try another usb port for the dongle. And another power supply if you can, that’s always good to try. (including another cable from power supply to pi) ---
**Author:** ![geckoVN](https://sea1.discourse-cdn.com/flex019/user_avatar/discussions.flightaware.com/geckovn/32/136508_2.png) [@geckoVN](https://discussions.flightaware.com/u/geckoVN)\ **Post date:** [December 2, 2018, 1:53pm UTC](https://discussions.flightaware.com/t/piaware-run-not-well/43175/7 "2018-12-02T13:53:40Z")
> [@wiedehopf](#): > > And another power supply if you can, that’s always good to try. > (including another cable from power supply to pi) Do this. The dongle will power-up with a low supply voltage, but not receive anything.