# PiAware or not **URL:** \ **Category:** ADS-B Flight Tracking\ **Created:** [July 7, 2018, 8:03am UTC](https://discussions.flightaware.com/t/piaware-or-not/37336 "2018-07-07T08:03:27Z")\ **Posts on this page:** 1\ **Showing post:** 5
**Author:** ![biekerc](https://sea1.discourse-cdn.com/flex019/user_avatar/discussions.flightaware.com/biekerc/32/136579_2.png) [@biekerc](https://discussions.flightaware.com/u/biekerc)\ **Post date:** [July 8, 2018, 7:54am UTC](https://discussions.flightaware.com/t/piaware-or-not/37336/5 "2018-07-08T07:54:44Z")
@abcd567 has written loads of tutorials and set up guides on this forum. Just search for them. What you need is the adsbreceiver- script to install other feeders. Keep in mind, they all run on Linux, so you need a device with a linux os to intstall either a piaware image and then run the script or install a standard installation like Debian or rasparian and add the feeders > [@ADS-B Receiver Project Setup Scripts](https://discussions.flightaware.com/t/ads-b-receiver-project-setup-scripts/17807): > > The ADS-B Receiver Project is a set of bash scripts and files which can be used to setup an ADS-B receiver on a Debian derived operating system. The scripts are executed in order by the main install script depending on the installation options chosen by the user. The project originally started out as a set of scripts created for my personal use to get a feeder back up and running quickly when a catastrophic event such as a SD card going bad happened. From there the project has grown quite a bit … --- _[View the full topic](https://discussions.flightaware.com/t/piaware-or-not/37336)._