Here are the steps I have used on multiple installations to install PiAware 2.1-3 and dump1090-mutability 1.15~dev.
I have had no issues using this on Raspbian, Ubuntu, or Debian.
swiftbyte.com/articles/soft … -or-debian
If you need only dump1090-mutability 1.15~dev the following commands should get you running:
sudo apt-get install git build-essential debhelper librtlsdr-dev libusb-1.0-0-dev pkg-config
git clone https://github.com/mutability/dump1090.git
sudo dpkg -i ~/build/dump1090-mutability_1.15~dev_*.deb
If you are adding the web interface a few more lines need ran:
sudo apt-get install lighttpd
sudo lighty-enable-mod dump1090
sudo /etc/init.d/lighttpd force-reload
As you can see it is really easy. Obj is doing a great job with this project.
Honestly it takes more time sifting through the links pointing to HOWTOs to find the instructions then it does to build and install the package.
Changed sudo service lighttpd force-reload To sudo /etc/init.d/lighttpd force-reload.