IP/combine1090 problem

rugomol · March 17, 2021, 5:25pm

This script is not valid for Openwrt.

wiedehopf · March 17, 2021, 9:03pm

I didn’t say use the install script.

I said the script combine1090 uses, let’s make it specific:

wiedehopf/combine1090/blob/master/combine1090.sh

#!/bin/bash

opts="-d"
retry=15
tcpopts="keepalive,keepidle=30,keepintvl=30,keepcnt=2,connect-timeout=30,retry=2,interval=15"

echo -n "Starting data redirection with socat for combine1090:    "
date

for j in $TARGET
do
	for i in $SOURCES
	do
		for p in $PORTS
		do
			sleep .2
			while true
			do
				echo "Redirecting: SOURCE: $i:$p TARGET: $j"
				socat $opts -u TCP:$i:$p,$tcpopts TCP:$j,$tcpopts

This file has been truncated. show original

You could then add all the necessary variables at the top

github.com

wiedehopf/combine1090/blob/master/combine1090.default

# Append the IP addresses of the feeders you want to combine in the next line:
SOURCES= 127.0.0.1 192.168.2.23
# Example: SOURCES= 127.0.0.1 192.168.2.23
# this would combine the data from receivers running on 127.0.0.1 and 192.168.2.23

# Append the ports to collect beast data from
PORTS= 30005 30105
# 30005 ADS-B data
# 30105 MLAT results from piaware/flightaware
# 30157 MLAT results from adsbexchange


# for the IP addresses in SOURCES all PORTS are used
# If your sources have the beast data on different ports, you can use CUSTOM to configure host:port combinations instead.
# uncomment CUSTOM (remove # at start of line below) and modify / append IP:PORT combinations:

#CUSTOM=127.0.0.1:29005 127.0.0.1:29999

This file has been truncated. show original

That should then run … you have to figure the autostart yourself.
Anyhow all it needs is bash and socat installed.

system · March 17, 2022, 9:04pm

This topic was automatically closed 365 days after the last reply. New replies are no longer allowed.

Topic		Replies	Views
Combining multiple receivers into one map - Combine1090 ADS-B Flight Tracking	66	8885	January 23, 2023
Dump1090-fa instead of combine1090 ADS-B Flight Tracking	19	2847	September 8, 2019
Combining Feeds with Netcat ADS-B Flight Tracking	10	887	August 26, 2019
Receive ADS-B with two Raspberry Pi ADS-B Flight Tracking	18	1467	March 1, 2019
Multiple Stations with RPi, but I can't merge them! ADS-B Flight Tracking	2	987	September 8, 2017

IP/combine1090 problem

Related Topics