# IP Address off 1 digit

**URL:** https://discussions.flightaware.com/t/ip-address-off-1-digit/98431
**Category:** ADS-B Flight Tracking
**Created:** [May 27, 2025, 11:33am UTC](https://discussions.flightaware.com/t/ip-address-off-1-digit/98431 "2025-05-27T11:33:27Z")
**Posts on this page:** 6
**Page:** 1

<div class="post-metadata">

### Author: ![hhgg68](https://sea1.discourse-cdn.com/flex019/user_avatar/discussions.flightaware.com/hhgg68/32/129109_2.png) [@hhgg68](https://discussions.flightaware.com/u/hhgg68)
#### Post date: [May 27, 2025, 11:33am UTC](https://discussions.flightaware.com/t/ip-address-off-1-digit/98431/1 "2025-05-27T11:33:27Z")

</div>

I am having a problem with my PiAware setup.

I just did a clean install of version 10.1 on my Pi flightaware.

And now my Site local IP on MY Flightawarwe page doesn’t match my skyaware map page. (Which shows the aircraft

It is 1 digit off.

I can’t change the IP address via my router as they are locked.

Any help would be grateful

---

<div class="post-metadata">

### Author: ![geckoVN](https://sea1.discourse-cdn.com/flex019/user_avatar/discussions.flightaware.com/geckovn/32/115319_2.png) [@geckoVN](https://discussions.flightaware.com/u/geckoVN)
#### Post date: [May 27, 2025, 11:52am UTC](https://discussions.flightaware.com/t/ip-address-off-1-digit/98431/2 "2025-05-27T11:52:17Z")

</div>

Not sure if I’ve got this right - your receiver is working correnctly, but the local IP you can watch skyaware is different to what is displayed on your My Stats page?

If that’s correct, I’d guess you enabled both WiFi and wired lan (which will give the Pi two valid IP’s)

---

<div class="post-metadata">

### Author: ![LawrenceHill](https://sea1.discourse-cdn.com/flex019/user_avatar/discussions.flightaware.com/lawrencehill/32/113365_2.png) [@LawrenceHill](https://discussions.flightaware.com/u/LawrenceHill)
#### Post date: [May 27, 2025, 11:54am UTC](https://discussions.flightaware.com/t/ip-address-off-1-digit/98431/3 "2025-05-27T11:54:57Z")

</div>

> [@hhgg68](#):
>
> It is 1 digit off.

I expect you have created a new site.  
You will need to set the feeder-id to the same as your original site. See:

> **[PiAware - Upgrade PiAware to the latest version - FlightAware](https://www.flightaware.com/adsb/piaware/upgrade)**
>
> Upgrade a version of PiAware to directly feed live ADS-B data to FlightAware via a Raspberry Pi running dump1090. Step-by-step instructions presented.

---

<div class="post-metadata">

### Author: ![tomvdhorst](https://sea1.discourse-cdn.com/flex019/user_avatar/discussions.flightaware.com/tomvdhorst/32/136431_2.png) [@tomvdhorst](https://discussions.flightaware.com/u/tomvdhorst)
#### Post date: [May 27, 2025, 12:34pm UTC](https://discussions.flightaware.com/t/ip-address-off-1-digit/98431/4 "2025-05-27T12:34:31Z")

</div>

Yep he made a new site indeed (actually 2 new ones)

---

<div class="post-metadata">

### Author: ![hhgg68](https://sea1.discourse-cdn.com/flex019/user_avatar/discussions.flightaware.com/hhgg68/32/129109_2.png) [@hhgg68](https://discussions.flightaware.com/u/hhgg68)
#### Post date: [May 27, 2025, 12:58pm UTC](https://discussions.flightaware.com/t/ip-address-off-1-digit/98431/5 "2025-05-27T12:58:05Z")

</div>

Found the problem. You ae’re right I had two staions 🙂

---

<div class="post-metadata">

### Author: ![system](https://sea1.discourse-cdn.com/flex019/user_avatar/discussions.flightaware.com/system/32/38558_2.png) [@system](https://discussions.flightaware.com/u/system)
#### Post date: [May 27, 2026, 12:58pm UTC](https://discussions.flightaware.com/t/ip-address-off-1-digit/98431/6 "2026-05-27T12:58:53Z")

</div>

This topic was automatically closed 365 days after the last reply. New replies are no longer allowed.
