# Google Home Integration?
**URL:** https://discussions.flightaware.com/t/google-home-integration/66914
**Category:** ADS-B Flight Tracking
**Created:** [July 9, 2020, 3:13am UTC](https://discussions.flightaware.com/t/google-home-integration/66914 "2020-07-09T03:13:30Z")
**Posts on this page:** 5
**Page:** 1
### Author:  [@danielhv](https://discussions.flightaware.com/u/danielhv)
#### Post date: [July 9, 2020, 3:13am UTC](https://discussions.flightaware.com/t/google-home-integration/66914/1 "2020-07-09T03:13:30Z")
Trying to figure out if anyone has setup a google home to show the Skyaware page on a TV. I can cast it to the tv from my laptop, but I’d like a more hands-off way of viewing it if possible.
I also run a plex server that I could use as well if anyone has done that.
---
### Author:  [@geckoVN](https://discussions.flightaware.com/u/geckoVN)
#### Post date: [July 9, 2020, 3:31am UTC](https://discussions.flightaware.com/t/google-home-integration/66914/2 "2020-07-09T03:31:04Z")
> [@danielhv](#):
>
> show the Skyaware page on a TV.
If your tv is IP capable, just point it at the Pi’s IP as you would any other site.
---
### Author:  [@SweetPea11](https://discussions.flightaware.com/u/SweetPea11)
#### Post date: [July 9, 2020, 4:12am UTC](https://discussions.flightaware.com/t/google-home-integration/66914/3 "2020-07-09T04:12:10Z")
> [@danielhv](#):
>
> but I’d like a more hands-off way of viewing it if possible.
Not sure what you mean by hands-off.
As @geckovn said above
I have one TV that has a browser and is connected to the local network. I use the URL [http://ip-of-my-pi/dump1090-fa](http://ip-of-my-pi/dump1090-fa)
I have another old TV just used as a monitor that has an old PC connected by HDMI so it just displays what is on the PC. Again I use the URL [http://ip-of-my-pi/dump1090-fa](http://ip-of-my-pi/dump1090-fa)
Do either of these suit your needs?
S
---
### Author:  [@foxhunter](https://discussions.flightaware.com/u/foxhunter)
#### Post date: [July 9, 2020, 5:43am UTC](https://discussions.flightaware.com/t/google-home-integration/66914/4 "2020-07-09T05:43:42Z")
Any Smart TV or other device which is able to access Internet Pages via graphical interface (typically a browser) is capable to show you the map of your Raspberry.
I do that from time to time on my Sony TV. Simply point the browser to the URL http://[yourPIAdress]/dump1090-fa and you will see the map there.
---
### Author:  [@system](https://discussions.flightaware.com/u/system)
#### Post date: [July 9, 2021, 5:43am UTC](https://discussions.flightaware.com/t/google-home-integration/66914/5 "2021-07-09T05:43:44Z")
This topic was automatically closed 365 days after the last reply. New replies are no longer allowed.