Drop in positions after Pi update and moving antenna

The 900 or even almost 1000 nmi was a receiver in a high rise building in Calcutta overlooking the bay of bengal.
Not sure the maximum i’ve seen in Europe.

You can get tropo on the US west coast, but it’s generally limited to bodies of water and certain weather conditions.

1 Like

So I installed @wiedehopf’s fantastic 1090 graphs. That’s very cool stuff. What would I be looking for amongst that content to see if I’ve got excessive interference? For example, here’s my signal level plot, past 24 hours:

image

That would be visible in the noise level. That seems to be pretty stable so I would look at your gain settings and the percentage of strong messages.
That should be less then 5% ideally but that can differ per location. Being near an approach or major airfield that could rise to 10%.

Well the new antenna is on order, should arrive on Monday according to FedEx. In the meantime, does anyone know what these entries are?

image

Seems like some sort of network of transmitters at PDX. This comes and goes occasionally throughout the day, never really sticks around for more than ten minutes or so.

What new antenna did you decide on?

I ordered this one: 5.5dBi 1090/978 N-type Female Antenna - Outdoor – ADSBexchange.com. And I don’t expect it to be the final answer to my setup’s issues, but I’ve got to start somewhere.

I like a lot of the DIY options that people mentioned upthread, but as I’m not physically in Portland it’s a little hard for me to put one of those together and test it out. Maybe I can get a second setup for Bend and try one of those out.

1 Like

Hopefully that will work out for you and get you on the right track. Not familiar with that particular antenna but I believe someone put you on to that one with a recommendation.

Well this is what I’m talking about!

Very drastic improvement.

1 Like

You’re on the stick now!

Looks like it’s a good thing for me that you are outside of my “Nearby Sites” range!

 

Although both Flightaware and Adsbexchange antennas have same Gain (5.5 dBi), their built is totally different.

The Flightaware antenna is a “wire collinear with phasing coil and decoupling sleeve”, while Adsbexchange is a “coaxial collinear”.

Please see photos of these two antennas with PVC pipes removed.

IMAGE 1 of 2
AdsbExchange 978/1090 Mhz Antenna

Click on Image to See in Full
Click Again to See Larger Size



IMAGE 2 of 2
Flightaware 1090 Mhz Antenna

Click on Image to See in Full
Click Again to See Larger Size



2 Likes

What the advantages and disadvantages of each and what do you prefer? FYI I have the flightaware antenna

I do not have Adsbexcnge antenna. I only have Flightaware antenna. As such I cannot tell which one is better.

I can only tell about Flightaware antenna, which I purchased in 2016 and am very satisfied with it.

It seems seeing the photos of internals of Adsbexchange & Flightaware antennas, you got the impression that I have got both these antennas, and I opened these and took the photos.

Actually I downloade these photos couple of years ago from internet (reddit). These photos are no more available there.

https://www.reddit.com/r/ADSB/comments/ljg4uy/insides_of_the_adsbexchange_9781090_and/

 

This topic was automatically closed 365 days after the last reply. New replies are no longer allowed.